I am using Zebra LP2824 printer. I can create the labels but the scanner will not read it. I have tried using all the types of barcodes from 128 to 3 of 9 etc etc. I have been struggling with this for last one week. Any advice will be welcomed.
Thanks for your help in advance.
4SquareGifts
*This post is locked for comments
Go to the printer properties and raise the head density to a higher level.
We use 13 and have no problems. the Default level is 7
Paul H
Dear in my little knowledge please add * before and after the number. May be it works.
Thanks for your input. I will try your suggestions. The scanner will read the label printed on 2/3" * 13/4" label printed on HP printer. I have to try with the size of the barcode.
Thanks,
4SquareGifts
couple of things u can check:
1. if the scanner is actually working, try scanning any product from the market (like a can of coke)
2. try changing the size of barcode font , sometimes too small or too big is a problem
3. try printing on different paper, might be problem with paper
Stay up to date on forum activity by subscribing. You can also customize your in-app and email Notification settings across all subscriptions.
André Arnaud de Cal... 290,902 Super User 2024 Season 2
Martin Dráb 229,297 Most Valuable Professional
nmaenpaa 101,156