AX version :10.0.9 (10.0.383.20009)
D365 F&O
Error message : No error, but unable to setup
My question is in two phases.
Want to know it feasible or not, if possible then how to do it.
Is there any workaround.
Question reframing.
For purchase receiving (inbound)
Item dimension = 10x10x10
Container dim = 100x100x100
location profile dim = 1000x1000x1000
As per above dimension location profile can contain 10 container, 10 items can be stored in 1 container.
Location profile should have 100 items max.
What we have done
- Defined physical dimension group to item code.
- Unit seq group to EA-PL
- Created container type = 100x100x100
- No flexi volume of container.
-crated location profile = with dimension 1000x1000x1000
- location directive = mapped location profile.
-created 10 locations under location profile ( There is no limitation)
- Work templates having two stages pick and put only.
-Enabled mobile device menue item and device menue.
Crated purchase order for that item with 15 quantity.
Expected result
System should accept 10 quantity in location 1 and remaining quantity should go to location2
Actual result:
System does not take logical decision by validating item dimension vs location dimension, it gives always location 1 for n number of quantity.
If we give stocking limit to container for example stocking limit set to 3 , then only three items will be in location1 and rest will go to another location
in this case too, system not validating item dimension vs avaialble voulme of the location.
Is there any option to put this validation or its not possible. Any work around plesae.?
