Skip to main content
Post a question

Notifications

Announcements

No record found.

Supply chain | Supply Chain Management, Commerce
Answered

Quality order is not validating with Update inventory status in ADW

Like (5) ShareShare
ReportReport
Posted on 30 Jan 2025 05:56:20 by 107

Hi Team,

I am currently validating the quality order with the Update inventory status (Pass/Fail) functionality, but the system is throwing an error so how can i solve.

I suspect that the Full Blocking functionality may not be supported in Advanced Warehouse Management. (Place of Full blocking)Could any please advise on how we can manage scenarios where the entire incoming quality should be blocked and moved to the damage area if it fails?

Item number: ADWItem-009Physical on-hand Site=4,Warehouse=44,Location=GoodsIN,Inventory status=Available,Batch number=BH-2901-005 0 cannot be picked because only -3 is/are available from the inventory for item: ADWItem-009.

I believe that it is coming because item is blocked from blocking(Not sure)

My process is straightforward:

  • All incoming items(Batch/Non batch) undergo a quality check.
  • Passed items move to the next location.
  • Failed items move to the damage/quarantine area

I have attached the relevant setup screenshots for reference—I believe I might be missing something.

Looking forward to your guidance.

  • Shubham-007 Profile Picture
    Shubham-007 107 on 01 Feb 2025 at 04:53:53
    Quality order is not validating with Update inventory status in ADW
     

    Thanks for your creative response.

    However, I would like to understand how the system handles the remaining quantity (excluding the sampled portion). If the sampling fails, the entire lot (full quantity) should be considered failed and moved to the restricted area. I believe I need to manually move the remaining quantity using a movement transaction—am I correct?

    I attempted to configure the system to automatically create a movement using the "Movement by Template" option when validating the quality order, but I couldn’t achieve this setup.

    I also explored using Detours, where I expected that when creating a manual movement, the system would provide a lookup showing the available quantity in the license plate. This would allow me to directly select the remaining quantities(License plate). However, I was unable to achieve this setup as well.

    Could you suggest the best approach for moving the remaining quantities in this scenario? Additionally, what is the industry best practice (especially in large-scale operations) for handling such cases?

  • Verified answer
    sagar_patil Profile Picture
    sagar_patil 664 Super User 2025 Season 1 on 01 Feb 2025 at 04:16:16
    Quality order is not validating with Update inventory status in ADW
    Hi,
     
     
    Only change is you can set item sampling is 100%.
  • Verified answer
    Sagar Suman Profile Picture
    Sagar Suman 5,974 on 31 Jan 2025 at 18:16:52
    Quality order is not validating with Update inventory status in ADW
    Hi,
     
    Make sure you have done below 2 setups 
     
    1 - Make sure that the warehouse is set to use quality order for warehouse processes, 
     
     
    2 - Quality association is set with value "Quality management for warehouse processes" in the Applicable warehouse type field 
     
    Item sampling as below 
     
     
    Now the test 
     
    1 - I registered a quantity of 110 pcs. System generated 2 put away work as below
     
     
    2 - System generated a quality item sampling work and a quality order. Complete the quality item sampling work.
     
     
     
    3 - Fail the quality order 
     
     
    4 - Work generated to move the failed items to blocked location. 
     

    Similarly, you can do lot more different combinations in item sampling and achieve the same results.  
     
     
  • Suggested answer
    Sagar Suman Profile Picture
    Sagar Suman 5,974 on 31 Jan 2025 at 15:34:14
    Quality order is not validating with Update inventory status in ADW
    Hi,
     
    The Quality management for warehouse processes feature takes effect only if the item on the source document line uses warehouse management processes (WMS), and if the Enable quality order for warehouse processes option is set to Yes for the warehouse on the source document line.
     
    Full blocking is not supported for value "Quality management for warehouse processes" in the Applicable warehouse type.
     
    Value of "All" inactivates the new quality management feature which works with advance warehouse management. 
     
     
     
     
     
     
  • lvdtang Profile Picture
    lvdtang 2,131 Super User 2025 Season 1 on 30 Jan 2025 at 21:19:37
    Quality order is not validating with Update inventory status in ADW
    Good day,
     
    Could you maybe share a screenshot of the on-hand inventory for this with the dimensions that have been mentioned in the error/warning message?
     
    Best regards,
    Laurens van der Tang

Under review

Thank you for your reply! To ensure a great experience for everyone, your content is awaiting approval by our Community Managers. Please check back later.

Helpful resources

Quick Links

Announcing Our 2025 Season 1 Super Users!

A new season of Super Users has arrived, and we are so grateful for the daily…

Vahid Ghafarpour – Community Spotlight

We are excited to recognize Vahid Ghafarpour as our February 2025 Community…

Congratulations to the January Top 10 leaders!

Check out the January community rock stars...

Leaderboard

#1
André Arnaud de Calavon Profile Picture

André Arnaud de Cal... 292,234 Super User 2025 Season 1

#2
Martin Dráb Profile Picture

Martin Dráb 230,994 Most Valuable Professional

#3
nmaenpaa Profile Picture

nmaenpaa 101,156

Leaderboard

Featured topics

Product updates

Dynamics 365 release plans