Rework Production Order

(0) Share

Report

Posted on by Cam Phung

997

Hi all,

I'm finding something about how to rework a item in AX 2012. That means, this production order are used for products needing repair or reworking.

Thanks in advance.

Phung Luong.

*This post is locked for comments

I have the same question (0)

All responses (8)

Answers (0)

Cam Phung 997 on at

Like (0)

Report

Hey,

I realize that Production Order have no field "rework order" the same as "rework batch" in batch order.

Who can explain to me this difference ?

Was this reply helpful? Yes No
Suggested answer

Guy Terry 28,924 Moderator on at

Like (0)

Report

Hi Phung Luong,

Rework functionality is only available on Batch orders (not Production / Works orders). This means you can only use it to rework Items which have Production type = 'Formula'.

Was this reply helpful? Yes No
Suggested answer

Weaveriski 23,620 Moderator on at

Like (0)

Report

You would just create a production order with no BOM and route, choose a production pool of "rework" or some other way to segregate/identify it and then build the BOM and route as the rework dictates. You could have standard rework BOM and routes at a rework warehouse.

Was this reply helpful? Yes No
Cam Phung 997 on at

Like (0)

Report

HI Steven,

That mean when I create a BOM for an item. I much create 2 BOM number. 1 BOM include standard material, 1 BOM have material is parent item.

When create a rework production order, just change BOM number.

Was this reply helpful? Yes No
Weaveriski 23,620 Moderator on at

Like (0)

Report

Yes basically. You do not have to have a rework BOM and it can never be the only active BOM as Planning would hit a cyclical never ending loop.

Was this reply helpful? Yes No
Cam Phung 997 on at

Like (0)

Report

Hi Steven Weaver,

I choose rework order field is Yes in batch order. I perform step by step according material (reservation, route..), however only estimate is available. So I can not continuing with this batch order. Do you know the reason why?

Was this reply helpful? Yes No
Weaveriski 23,620 Moderator on at

Like (0)

Report

Probably because of your status setup in your parameters. Estimate it and then move on, if you cannot check the status parameters settings.

Was this reply helpful? Yes No
Suggested answer

Sridhar N 45 on at

Like (0)

Report

In case normal production order you can select the BOM lines manually this is typically the finished product you need to re-work and any additional raw materials and use production pool to identify re-work order.

In case of batch order, you have the option to specify the batch order as re-work order

Was this reply helpful? Yes No