Does anyone have a suggestion for enlarging the font on the function keys at the bottom of the POS screen. I have a location that users are complaining of the small font. Looking for suggestions. I know you cannot reprogram the keys functionality, just limit access. But I have not found anything that allows for changing the font to have better readability.
Thanks,
*This post is locked for comments
This solution worked for us. The user's staff was happy with the results. I tell you, I tried it first in my lab so I could see the results and make note of the settings that worked the best. If they can't see this, I am going to suggest reading glasses.
Thanks for your quick response. It helped me out a lot.
LaDenna
You don't have a lot of options. The POS screen is designed to run in a 800 x 600 screen, so if you are running a higher resolution, you may have to change it.
Try this though - when in the POS screen press either Ctrl + F6 or click on the top empty box on the bottom left until you see the Ctrl word or the F6 button so it says Display. On the right side find the line that says "Display Function keys on bottom" - try increasing the size from the default 8%.
#1
André Arnaud de Cal...
294,261
Super User 2025 Season 1
#2
Martin Dráb
233,013
Most Valuable Professional
#3
nmaenpaa
101,158
Moderator
Share
Report
All responses (
Answers (
