Indirect Cost- Output unit Based not required in Child Production Order. (Calculation Form)

(0) Share

Report

Posted on by Muhammad Burhan Zahoor

145

Hi All,

I have problem in BOM Calculation Form. I have apply this indirect cost only for parent production order but in BOM calculation form its allocated indirect cost with zero amount in all child order.

How its possible indirect cost apply only for parent item not for child item

*This post is locked for comments

I have the same question (0)

All responses (8)

Answers (0)

Sort by

Ludwig Reinhard Microsoft Employee on at

Like (1)

Report
Copy link

Link copied!

Hi Muhammad Burhan Zahoor,

Can you provide some additional information how your costing sheet is setup?

Especially the indirect cost element and at which level it is applied (subtype field).

Many thanks,

Ludwig

Was this reply helpful? Yes No
Muhammad Burhan Zahoor 145 on at

Like (0)

Report
Copy link

Link copied!

Hi Ludwig,

Thanks for your reply!

I have apply this indirect charges only for F.G. Item not for child (Pegged production order) item. When we run BOM calculation and see cost then above indirect cost also allocated with child (Pegged) Production order with zero amount.

Was this reply helpful? Yes No
Ludwig Reinhard Microsoft Employee on at

Like (0)

Report
Copy link

Link copied!

Hi,

What do you see in the general tab?

Can you also share that screen?

Best regards,

Ludwig

Was this reply helpful? Yes No
Muhammad Burhan Zahoor 145 on at

Like (0)

Report
Copy link

Link copied!

Hi,

Regards,

Muhammad Burhan

Was this reply helpful? Yes No
Ludwig Reinhard Microsoft Employee on at

Like (0)

Report
Copy link

Link copied!

Hi,

Have you tried taking out the per item parameter?

In addition, did you intentionally setup the output unit based node type and/or could you alternatively make use of a surcharge node?

Best regards,

Ludwig

Was this reply helpful? Yes No
Muhammad Burhan Zahoor 145 on at

Like (0)

Report
Copy link

Link copied!

Hi,

Thanks for your valuable addition!

Every group item required to post indirect charges of 100, so per item check box is checked in our case.

I have to apply indirect charges of 100 rupees in every produced item of specific group through production. So I used output unit based node.

Regards,

Muhammad Burhan

Was this reply helpful? Yes No
Suggested answer

Ludwig Reinhard Microsoft Employee on at

Like (0)

Report
Copy link

Link copied!

Hi Muhammad Burhan,

If you require this node type, you can only check if de-activating the per-item checkbox helps.

If it does not then I would say that you need to modify something here.

Would be great if you could run an additional test production order with an updated costing sheet that has the per item parameter deactivated and keep us updated here.

Many thanks,

Ludwig

Was this reply helpful? Yes No
Muhammad Burhan Zahoor 145 on at

Like (0)

Report
Copy link

Link copied!

Thanks Ludwig for reply!

In General tab, If we unchecked the per item check box then in calculation tab Item group wise rate not give on it. But in our case I have to apply item group wise indirect cost.

Was this reply helpful? Yes No