495
Hi everyone. I have a letter from Wells Fargo Bank telling me our equipment may not support the new 2048 SSL encryption standards for credit card transactions. What is the solution for this problem?
Thanks for all your previous support.
*This post is locked for comments
Heidi,
I got it from someone. Has anyone called the number on the letter and set up a test account to see if it works with the new requirements?
Should be easy enough to do.
Jeff,
I attempted to send you the letter.
Microsoft,
It would be of great benefit to provide clear information on this issue to your VARs and clients.
Regards,
~Heidi
Jeff,
Here is what the letter states:
"The new standards are effective August 31, 2013.
If your equipment is not updated by that time, your Point of Sale equipment may not be able to connect to the Internet to process transactions."
That might be why no one is complaining ..yet..
thanks
None other than what Shawn from MS posted earlier.
I don't have the letter everyone is referring to, but I think I was told the new process was to take effect July 1. I don't see anyone complaining here now on the 10th.
Jeff,
Are you aware of any documentation provided by Microsoft that states in clear language that RMS FP2 is compliant with and supports SSL 2048, or that answers the Wells Fargo language. Clients are more happy seeing something official than hearing me say it.
Thank you,
Heidi
Different Partners provide different levels of support, some are just box pushers, some are more active/responsive.
We actually install updates for our clients remotely so they do nothing other than read the email that says we have installed them and any major changes that were made. This is part of our monthly, 24/7, RMS support plan.
The $.53 per day refers to the BREP Maintenance plan from MS. It runs $190.40 per lane/year (16% of $1190 MSRP), it does not include any support from MS, just program updates. There are 2 more expensive plans, BRAP and BRAP+ at 18% or 25% of MSRP that includes some MS support. We encourage our clients to purchase the least expensive version and then use us for RMS support. Here's a link to the MS plans: www.microsoft.com/.../service-plans.aspx
Click on the dropdown to find the option for RMS/POS.
Why do they have to be in Houston? We service clients all over the U.S. and Canada remotely from our Las Vegas, NV office.
Jeff,
I don't mind paying for the upgrade support, but my rant was about the lack of
assistance that MS gives. If you see the post before mine, I'm not the only one AND he has a
support partner! So, if a VAR or MS partner can't help or is not familiar with the updates because
MS hasn't notified them, why have a plan?
Also, I do know that my equip will probably have to be updated in a few years. BUT at least I'll
Know it's the equipment and won't have to hunt around forums for solutions.
BTW, I have yet to find anyone in the Houston area that can provide support and updates
for $.53 per day. Thanks
Why is this an MS issue? If you keep up with the Maintenance, you are/would be compliant. It costs $.53 per day/lane for the least expensive Maintenance plan.
I guess you don't know that most all standalone devices will need replacement by 2015 to support EMV and Pin and Chip either.
Come on back and tell us how well the terminal works when your cashier enters $1000 for a $100 sale or worse $100 for a $1000 sale.
I also don't understand why the hate to pay for and keep your software updated. MS didn't change the rules to go to 2048, Wells Fargo and other banks did. Software upgrades are always going to be needed and in some cases you have to pay for them!
I found the solution! We are opening a 2nd location and as we were discussing who to use for our cc processing, I had an ah ha moment. If I purchase a stand alone terminal and debit card terminal, I do not have to worry about being compliant because the machine is talking directly with the processor, which is compliant-I basically bypass MS RMS. My solution is to disconnect my pin pad and our magtek swiper from the PC. This will stop the communication thru MS RMS, which is not compliant and they can't figure out how to get there. Yes it is an additional expense and frustrating, but since all fingers point to MS and they don't make it easy, I just won't buy their software again..EVER. Although this defeats the purpose of the RMS software, I believe my problem is solved.
Hi, it seems there is a lot of finger pointing going on here, blaming the internet service provider etc for any problems with the 2048 requirements etc. I have come to the conclusion that MS RMS is in compliance with the new requirements only if it is up to date with the latest service packs etc. I have SP2 installed on my machines, which is not up to date and thus is not compliant with the 2048 requirements. I am in process of acquiring the necessary updates from my partner.
I am not satisfied with the arrangements that Microsoft has for communicating with me about new features, new service packs-updates etc. My partner is rather silent on new developments, and will help with any problems, but is not too free with new information or developments with the software. He does not keep me informed of software or industry developments. Maybe a newsletter from Microsoft RMS would be nice. I will look around the site today to see if anything jumps out at me to keep me informed.
#1
André Arnaud de Cal...
292,575
Super User 2025 Season 1
#2
Martin Dráb
231,493
Most Valuable Professional
#3
nmaenpaa
101,156
Share
Report
All responses (
Answers (
