You’re offline. This is a read only version of the page.
We need to replace our current ML-590 printers and would like to replace them with the Okidata ML-420
Will these work with Microsoft Dynamics 10 and be able to switch over without hassle?
Are there any settings I will need to change?
Dustin
*This post is locked for comments
I have the same question (0)
According to Microsoft, the only Okidata Dot Matrix printers supported with GP10 are the following:
Okidata Microline 421 - UNIDRV - ML421.GPD - 5.00
Okidata Microline 8810 - UNIDRV - 8810A.GPD - 5.00
Okidata Pacemark 4410 - UNIDRV - 5.00
I did recently get an ML-420 to work for GP 10 for 7" checks (all reports are going to a laser). Had a little bit of trouble getting the paper size to stay correctly (had to use named printers and set the paper size in Windows) and I believe we ended up using the IBM ProPrinter emulation although I think the client later got it to work with the standard Okidata emulation.
Good Luck!
Mike
Share
Report
All responses (
Answers (
9
