Microsoft Dynamics AX (Archived)

Field value initializing to initial value even after changing the value

(0) Share

Report

Posted on by Kedar Dande

640

Hi All,

I've trying with SysOperationFramework with DataContract, Controller, Service and a UI builder class.

I've a integer field on dialog which is initially loaded with the value '0' by default. I've created a method in UI builder class whenever the value of this field modified, some of the controls from the dialog should enable/disable. Whenever I change the value of the integer field some of the other controls on the dialog enabling but, even after changing the integer field value it's remains the default value.

Can anybody help me out to solve this issue.

Thanks & Regards,

Kedharnath Dande.

*This post is locked for comments

I have the same question (0)

All responses (11)

Answers (0)

Iulian Cordobin 8,201 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

So, to recap, you have created a custom UIBuilder class and override the modified event by using the registerOverrideMethod on the integer field, right?

And at this point the code is not working properly: the integer value is changed back to 0, after you have changed it manually to another value in the dialog?

Was this reply helpful? Yes No
Kedar Dande 640 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

Yes, Iulian.

Can you just help me out to resolve this issue.

Was this reply helpful? Yes No
Kedar Dande 640 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

Hi Iulian.

Can you just go through once on this issue also.

community.dynamics.com/.../492526

Was this reply helpful? Yes No
Kedar Dande 640 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

Hi Iulian,
Please find the below screenshots.

Dialog:

PostBuild():

Modify method:

Was this reply helpful? Yes No
Suggested answer

Iulian Cordobin 8,201 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

So what is the field that is getting its value reset? Is it the HierarchyLevel?

I can see that you are overRiding both Hierarchy level field and AllocationKey field modified methods. In the modified of the HierarchyLevel I can see you are reseting the value of the AllocationKey.

I suspect you have a problem in this area, the code for the modified method for the AllocationKey (can you show it also) is reseting the value of the Hierarchy.

Was this reply helpful? Yes No
Kedar Dande 640 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

Hi Iulian,

Basically the field not persisting the value whichever we select. So, Whenever I enter the value in hierarchy level, its resetting after pressing tab and even I AllocationKey also same,

it's a dropdown and whenever I made selection its not selecting. That's the reason why it's not working.

One more radio button I've in a dialog 'Add' and 'Remove'. For this radio button control also it's happening same. Even if select the remove the control is placing over 'Add'. Because 'Add' is initially selected.

If you want I'll send you override method for all these 3 fields.

Was this reply helpful? Yes No
Kedar Dande 640 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

modify allocation key:

modify hierarchy level:

modify years:

Was this reply helpful? Yes No
Kedar Dande 640 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

Hi Iulian,

Please guide me in resolving this issue.

Was this reply helpful? Yes No
Kedar Dande 640 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

Hi All,

Does anyone have idea about this strange behaviour.

Please suggest or guide me something.

Was this reply helpful? Yes No
Kedar Dande 640 on at

Like (0)

Report

RE: Field value initializing to initial value even after changing the value

Hi Guys,

Identified the issue and after adding return types to the method resolved issue.

Was this reply helpful? Yes No