You’re offline. This is a read only version of the page.
Announcements
426
good day guys,
i have a mk500 price checker for rms but it didn't come with software. what software can i use to install on the device to work with the rms?
*This post is locked for comments
They don't work with RMS right out of the box as far as I know. There is a module in the Retail Realm Store Utilities that runs this unit.
Hello Devanand,
Thank you for your question.
Please note that RMS has not been tested with such price checker devices, and it may not correctly relay the information to the device.
I would recommend contact Motorola to see if it is compatible with RMS 2.0, and if so, how to configure the device to work with RMS.
Thank you,
Scott Wardzinski
Microsoft Dynamics RMS & POS Support Engineer
Is it a Zebra or a Motorola?
Once you've determined that you'll need to go to the manufacturers site and find the OPOS drivers for the device.
It is usually a driver + a OPOS utility all pos equipment runs off OPOS drivers not (windows drivers) Opos drivers usually don't come on a disk so you should be glad you don't have one because you probably would have broken your RMS if you tried.
click start then type UAC
then lower the USER Controls to never notify FIRST
This is technically a scanner is it not.
If you look in your existing program files you should find a folder called OPOS
There is a utility in there to allow you to add devices.
Select a scanner
Then go to the website of the manufacturer and download the OPOS drivers for this device.
install the drivers as administrator by right click on the .exe file (run as administrator)
You will need the device to have a LDN (logical device name) call it: scanner
You will also have an opportunity with in the OPOS utility to: CHECK HEALTH
The device must pass Check Health "OR" you will need to get help /support from whomever made the device.
If it doesn't pass check health you can't add it as a device to RMS until it does.
One it has come back here and update this post and I will help you with the next steps.
If it doesn't pass check health do not ask for additional help here because only the manufacturer can get their device to work.
It is not an RMS problem.
Thanks,
Hope I helped.
Butch
#1
André Arnaud de Cal...
294,206
Super User 2025 Season 1
#2
Martin Dráb
232,968
Most Valuable Professional
#3
nmaenpaa
101,158
Moderator
Share
Report
All responses (
Answers (
