425
Hi folks,
I'm looking for a download link for GP 10. I'm working an an upgrade fro 10 tp 2018. I moved the existing databases to a new server, but the installer packages are nowhere to be found.
Thanks.
Jim
*This post is locked for comments
Hello Jim,
Most likely you're past this, but if not, since you can run the GP 2018 R2 DVD installer fine, but not the KB4458410 and KB4468818 MSP files to patch the GP 2018 install, what you can actually do is go into the GP 2018 R2 DVD and into the 'Updates' folder, where you'll see the R2 MSP file.
Replace the existing MSP file in the Updates folder of the GP 2018 R2 DVD with the KB 4468818 MSP file, since our patches are cumulative, you don't need to install both KB4458410 and KB4468818 MSP files, as 4468818 will contain any changes from 4458410 and prior.
By doing this, you can then install GP 2018 R2 at the 18.00.0672 directly, without needing to then go back and manually apply the KB4468818 patch after, this install will do both at the same time.
We see better results with installing Dynamics GP directly this way with the desired patch/build, then going back and applying a MSP patch to an existing install of Dynamics GP, though both should work.
Just wanted to mention this.....
Thanks
I went through the upgrade paths, etc and I think I have them down. I got GP 2015 upgraded to 1179. Once I got there, I moved on to upgrading to GP 2018 R2 again. I downloaded patches for GP 2018 R2. I'm able to install 2018 R2 using MDGP_2018_R2_DVD_Enus. The installer runs fine. Next I try to install the service pack (KB4458410 and KB4468818). The Windows installer for both of them dies about half-way through the install on the KB files. It leaves the GP build unchanged. GP Utilities won't run because it's an invalid build.
Any ideas what would make the KB installers fail? The installers I used for the previous hops (GP 2013 and GP 2015) ran fine.
Thanks.
Jim
mbs.microsoft.com/.../HOT_TOPIC_MDGP2018Upgrade
Here are the upgrade paths for GP 2018.
I was looking for the GP10 installer because I moved all the databases to a test server but I couldn't install the GP10 app. I didn't want to move forward blindly without testing the migration.
As for the upgrades, I went GP 10 >GP 2013R2 >GP 2015 R2. I hit the Sy07240 issues during the upgrade but I found my way past it. I'm trying to get to GP 2018 R2 now. I get an error:
Error: Product 0 does not support upgrading from version 14.0.725.
That's tomorrow's problem.
Thanks for your help on here, Richard. I put together my migration path based on some of your other posts.
You do not need the installer for GP 10. You can upgrade to GP 2010 or GP 2013. If you need to upgrade reports copy the DYNAMICS.DIC file from the GP 10 folder.
mbs.microsoft.com/.../HOTTOPIC_MDGP2010_Update
Check out this link for any needed service packs.
#1
André Arnaud de Cal...
292,516
Super User 2025 Season 1
#2
Martin Dráb
231,409
Most Valuable Professional
#3
nmaenpaa
101,156
Share
Report
All responses (
Answers (
