Skip to main content

Notifications

Microsoft Dynamics RMS forum

EMV Reader and MS Dynamics POS 2009?

Posted on by Microsoft Employee

Is there a patch available to allow our software to be compatible with a EMV Chip reader?

*This post is locked for comments

  • Kevin Antosh Profile Picture
    Kevin Antosh 1,645 on at
    RE: EMV Reader and MS Dynamics POS 2009?

    No problem - it has been mixed with First Data - I've had several RMS users who have had to move to Card Defender or stand alone payment terminals over the last year. Seems like nearly all the processing companies are cracking down on using the native processing in RMS, POS 2007, POS 2009, and POS 2.0. Best advice is either a stand alone payment terminal or looking at a new POS system like Retail Management Hero or Cloud Retailer.  

    You may also want to review the POS 2009 life cycle information as it looks like all Microsoft support for POS 2009 ends in 2019.  RITE will try and support as best we can but Microsoft will be ending all official support: community.dynamics.com/.../pos-2009-end-of-mainstream-support

  • Community Member Profile Picture
    Community Member Microsoft Employee on at
    RE: EMV Reader and MS Dynamics POS 2009?

    Thanks,  And thanks again for all your help,  I was intouch with Gary Noble today.   I know TSYS is terminating everyone soon,  But what about First Data and RMS and Pos 2009  will they still continue for some time or are the turning off the pipes as well?

  • Kevin Antosh Profile Picture
    Kevin Antosh 1,645 on at
    RE: EMV Reader and MS Dynamics POS 2009?

    Hi Chris, Card Defender only works with the Microsoft Dynamics RMS/HQ, Retail Management Hero, and Cloud Retailer point of sale software programs. Please let me know if I can be of further assistance. Thanks!

  • Community Member Profile Picture
    Community Member Microsoft Employee on at
    RE: EMV Reader and MS Dynamics POS 2009?

    Kevin,  You had mentioned Card Defender in a post,  Will That work on POS 2009?

    Thanks

  • Kevin Antosh Profile Picture
    Kevin Antosh 1,645 on at
    RE: EMV Reader and MS Dynamics POS 2009?

    Hi Chris - I will ask Gary in our office to get in touch with you. Thanks!

  • Community Member Profile Picture
    Community Member Microsoft Employee on at
    RE: EMV Reader and MS Dynamics POS 2009?

    Thanks for your response,  I looked at your site and would like to chat about some options.  My email is cbostard@aol.com

  • Kevin Antosh Profile Picture
    Kevin Antosh 1,645 on at
    RE: EMV Reader and MS Dynamics POS 2009?

    Hi Chris, while not ideal due to possible entry errors, the quickest and least expensive option is to put in stand alone payment terminals. Otherwise, you are looking at needing to replace POS 2009 since TSYS is also turning off support for native processing in RMS as well.

  • Community Member Profile Picture
    Community Member Microsoft Employee on at
    RE: EMV Reader and MS Dynamics POS 2009?

    I know this is an old thread,  Will this work on Pos 2009?  I am running into a problem where Credit card processor TSYS is no longer going to service the url transaction preset in the program,  I am looking for solution fast

  • Community Member Profile Picture
    Community Member Microsoft Employee on at
    RE: EMV Reader and MS Dynamics POS 2009?

    You can use an RMS plugin that supports EMV terminals. My company Velocity provides an RMS plugin that supports the Ingenico Telium terminals. These terminals process EMV transactions as well as use encryption to protect swiped data.

    For more information, please follow this link to our website. nabvelocity.com/.../rms-vsi

    Thank you,

    Ed

  • Suggested answer
    Community Member Profile Picture
    Community Member Microsoft Employee on at
    RE: EMV Reader and MS Dynamics POS 2009?

    As the mainstream support for POS 2009 expired before the required EMV chip readers, there is no patch/update available for POS 2009, nor will we be testing any such card readers with POS 2009.

    Thank you,

    Scott Wardzinski

    Microsoft Dynamics RMS & POS Support Engineer

Under review

Thank you for your reply! To ensure a great experience for everyone, your content is awaiting approval by our Community Managers. Please check back later.

Helpful resources

Quick Links

November Spotlight Star - Khushbu Rajvi

Congratulations to a top community star!

Forum Structure Changes Coming on 11/8!

In our never-ending quest to help the Dynamics 365 Community members get answers faster …

Dynamics 365 Community Platform update – Oct 28

Welcome to the next edition of the Community Platform Update. This is a status …

Leaderboard

#1
André Arnaud de Calavon Profile Picture

André Arnaud de Cal... 290,867 Super User 2024 Season 2

#2
Martin Dráb Profile Picture

Martin Dráb 229,173 Most Valuable Professional

#3
nmaenpaa Profile Picture

nmaenpaa 101,156

Leaderboard

Featured topics

Product updates

Dynamics 365 release plans