We have a customer who just upgraded their Termnal Server and since that change, all GP reports are out of alignment
- the print is dropping off to the left. It is happening
on all printers. We tested with them on an HP Laser Jet 1320
PCL 6. The Terminal Server is using Terminal Services Easy
Print drivers - we installed both the PCL 5 and PS drivers
on the workstation and the printing was still the same - no
change. We changed the printer setting to scale to fit but
it didn't resolve the issue - print still dropping off the
left side. We were going to try adjusting the
horizontal/vertical alignment in the print dialogue box but
those options are grayed out in that window. Not sure what
to try next...
*This post is locked for comments
I have the same question (0)
