Quantity field in Production BOM Lines table [99000772]

(0) Share

Report

Posted on by Brostradamus

Hi,

Trust you are well.
We are working on a project integrating Solidworks (CAD client) with NAV using Odata/Rest.

We have been able to get all core modules working except the Production BOM Lines table.. The issue it seems is that the "Quantity" field isnt either updating in-sync with the "Quantity per." field nor is NAV allowing the integration code to progrmatically populate this field. The field is also inaccessible to a manual data entry operator.

Can anyone point to some documentation or workaround this issue?

We are currently using Dynamics NAV 2013 R2.

Thanks.

All responses (2)

Answers (1)

Verified answer

YUN ZHU 74,036 Super User 2024 Season 2 on at

Like (0)

Report

RE: Quantity field in Production BOM Lines table [99000772]

Hi, There is an older info below that I hope will give you some hints.

http://nav90help.advania.is/help/en/T_99000772_45.htm

I also checked the latest source code (NAV may be different, you need to double check), Quantity is a field that cannot be edited. It is calculated according to the "Calculation Formula" method when you enter the Quantity Per field.

Hope this helps.

Thanks.

ZHU
Suggested answer

Marco Mels on at

Like (1)

Report

RE: Quantity field in Production BOM Lines table [99000772]

Hello,

We currently do not have dedicated Dev support via the Dynamics 365 Business Central forums, but I wanted to provide you some additional resources to assist. If you need assistance with debugging or coding I would recommend discussing this on one of our communities.

www.yammer.com/dynamicsnavdev

www.dynamicsuser.net/.../14

I will open this up to the community in case they have something to add.

Thanks.