AX 2012 CU3 update - Software update checklist completed but continues to notify during AX login "The model store has been modified"

(0) Share

Report

Posted on by Sylvryd

935

I am trying to setup a new DEMO environment for AX 2012 FP1 w/ CU3.

I first installed FP1 using the FP1 installation Disc. I restored & used the AX Demo database available for download from MS for AX 2012. No issues.

I then applied the CU3 update and after completing the software update checklist I continue to receive “The model store has been modified” message when logging into AX. If I start the software update checklist again everything is marked as Finished except for an item under Data upgrade labeled “Upgrade additional features (required)” and identified as Ready.

I have already completed this item previously and when I click on that check list option to open the upgrade script history screen all entire in that screen are marked with a status of “Finished”

What am I missing to remove this message during login or what can I do to confirm there are no issues with the install or AX environment?

Thanks

*This post is locked for comments

I have the same question (0)

All responses (9)

Answers (0)

Andy Adamak 4,074 on at

Like (0)

Report

Having this same problem after upgrading to R2. Any pointers on what to do to make this go away?

Was this reply helpful? Yes No
Suggested answer

André Arnaud de Cal... 301,035 Super User 2025 Season 2 on at

Like (0)

Report

Check the version of AX by using the form About Microsoft Dynamics AX.

If you see "Solution version: 6.1.1100.0", you can indeed expect problems.

If you want to use this demo-set, you can better install AX2012 + CU3 with a clean database. Then export the model store. Restore the demo database. Import the (just exported) model-store again. Compile and synchronize the database.

This worked for me. The demo database contains the model store, so CU3 was overwritten.

Was this reply helpful? Yes No
Andy Adamak 4,074 on at

Like (0)

Report

I'm having the problem in R2... which is version 6.2.158.0. We were running CU3 previously and that updated without issues. R2 has been fine thus-far, I just can't get this "Model store has been modified" screen to go away. I've tried to compile and synchronize, but the screen still pops up on login.

Thanks

-Andy

Was this reply helpful? Yes No
busch 450 on at

Like (0)

Report

I am having the problem after just completing slip stream upgrade from FP CU3 to R2 CU1.

Each client login is also reporting "Object Server 01: Internal version mismatch. Microsoft Dynamics AX client from XXXAOS (6.2.1000.156) tried to attach with 6.2.158.0 revision of kernel" in the event log. Help about shows Kernel version: 6.2.1000.156. AX32.exe lists the Product version as 6.2.1000.156. However it is strange that AxDebug.exe has product version 6.2.158.0. Did the debugger executable not get updated in CU1?

Was this reply helpful? Yes No
busch 450 on at

Like (0)

Report

My issue with the always appearing "The model store has been modified" was due to releaseUpdateConfiguration.MinorUpgrade being set. I got this to reset by opening the Data upgrade checklist for in-place upgrade and marking ALL of the task complete, and closing the check list.

I am still getting the version mismatch event log warning.

Was this reply helpful? Yes No
Andy Adamak 4,074 on at

Like (0)

Report

Busch,

What about the tasks that you can't mark as complete? Such as the very last "Synchronize the database" task. We get errors due to configuration keys we have turned off, so it's never truly "successful"... but it is. However, AX wont mark it as complete.

Was this reply helpful? Yes No
busch 450 on at

Like (0)

Report

Andy,

Sorry, my non-completed tasks were in the top part of the data upgrade checklist so I could go mark them complete.

You could put a breakpoint for the debugger in the SysCheckList form's close method and you'll see the checks being made. I don't have access to a system now.. but I beleive you'll find that if you get the isEmpty to return a true result, that check list gets finialized.

Was this reply helpful? Yes No
Heinz Schweda 1,367 on at

Like (2)

Report

Hello, had this behaviour recently after upgrading model files. In my case the field MinorUpgrade in table ReleaseUpdateConfiguration was set to 1, so the checklist always opened.

I fixed this using a job containing this line:

SysCheckList_Update::finalizeMinorUpgrade();

Hint: AX uses info.startup() to check, if checklist must be opened.

Was this reply helpful? Yes No
Andy Adamak 4,074 on at

Like (0)

Report

Heinz,

THANK YOU!. Fixed. You're the best.

Was this reply helpful? Yes No