AX 2012 - project invoice posting

(0) Share

Report

Posted on by Long O.Chandara

Is there anybody having experience in project invoice approval in "project Module" under AX 2012 (new release with Retail module)?..We could post under 1st pre-released AX 2012 version but cannot and don't know how to process in the new version..Highly appreciate in advance. longchandara@sks.vn..

*This post is locked for comments

I have the same question (0)

All responses (12)

Answers (1)

ahmed abdel monem i... 450 on at

Like (0)

Report

you must activate the workflow to approval the invoice and post invoice

Was this reply helpful? Yes No
Junaid Idrees on at

Like (0)

Report

Guys,

I've the same issue. POST Button is hidden.

DO i need to activate "Invoice Proposal Template" Workflow or what?? Please confirm

Thank you.

Was this reply helpful? Yes No
Verified answer

Girish_Bhatkal 40 on at

Like (0)

Report

First you have to make sure you have setup the work flow for Project quoation approval.

Also make sure the batch setup is completed. if you are struggling with the batch setup then workaround is run the form "Tutorial_WorkflowProcessor" and start the process.

Was this reply helpful? Yes No
Long O.Chandara 40 on at

Like (0)

Report

Thanks Girish for your indication, we will try this...

Long

Was this reply helpful? Yes No
Suresh Kotapalle on at

Like (0)

Report

Juniad,

yes workflow needs to be activiated and project invoices are always subjected to the workflow. You will see the post button once you approve the invoice using workflow.

Was this reply helpful? Yes No
Community Member on at

Like (0)

Report

Hi,

I activated Invoice proposal template workflow and the invoice proposal status is Approved already, but the POST button doesn't come out. What else do I have to setup/activate?

Thank

Was this reply helpful? Yes No
Sandeep Chaudhury 3,303 on at

Like (0)

Report

Hi Junaid,

Follow the instructions below and it should help you.

1. Check the Invoice proposal approval workflow template to see if it has a "Post invoice proposal" step configured in it.

2. If it is setup, make sure that this is assigned to the user who wants to post the invoice.

3. If you just don't wanna configure the "Post" step in the workflow, delete the same. After your invoice proposal is approved, you will find it ready to be posted under the PMA > Periodic > Invoices > Post invoice proposals.

Also note that, if you have not assigned the "Post" step to an appropriate user in the workflow, you will still be able to find the proposal ready to be posted under PMA > Periodic > Invoices > Post invoice proposals.

Let me know if this information helps.

Thanks

Sandeep

Was this reply helpful? Yes No
Community Member on at

Like (0)

Report

Hi Sandeep,

It works. Thank a lot.

HV

Was this reply helpful? Yes No
Junaid Idrees on at

Like (0)

Report

Hi Sandeep,

Sorry for late in getting back to you dear.

I configured WF but use the element "Invoice proposal Approval" not "Post Invoice" as task. So Post Invoice will come after "Invoice proposal Approval ??? Please confirm so that I'll ask our technical person to modify the same.

Another question, after setting the above WF without "Post Invoice" element, i found system is not showing invoice account in PMA > Periodic > Invoices > Post invoice proposals.. I hope, it will appear after reconfigure the WF with Post Invoice. Please share ur feedback, if you experience the same ever.

Thank you dear for the steps.

Regards.

Was this reply helpful? Yes No
Moises 170 on at

Like (0)

Report

[quote user="Junaid Idrees"]
Hi Sandeep,

Sorry for late in getting back to you dear.

I configured WF but use the element "Invoice proposal Approval" not "Post Invoice" as task. So Post Invoice will come after "Invoice proposal Approval ??? Please confirm so that I'll ask our technical person to modify the same.

Another question, after setting the above WF without "Post Invoice" element, i found system is not showing invoice account in PMA > Periodic > Invoices > Post invoice proposals.. I hope, it will appear after reconfigure the WF with Post Invoice. Please share ur feedback, if you experience the same ever.

Thank you dear for the steps.

Regards.

[/quote]Another question, after setting the above WF without "Post Invoice" element, i found system is not showing invoice account in PMA > Periodic > Invoices > Post invoice proposals.. I hope, it will appear after reconfigure the WF with Post Invoice. Please share ur feedback, if you experience the same ever.

Hi Junaid

I used the "Post Invoice proposal" into my WF but the Post button don´t be available in task bar, the Post button is at the end of the WF line, yes is the same.

Sorry my english, regards.

Was this reply helpful? Yes No