NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

(0) Share

Report

Posted on by algeloca

160

Hi,

I am using WMS feature in NAV2015. My location is configured as Require Receipt, Shipment, Put-away, Pick and Bin Mandatory. I have created four bins as "Receipt", "Shipment", "Put-away" and "Pick" as their bin codes. In my location card, I have mapped "Receipt" and "Shipment" bin codes in their respective fields. Default Bin Code is Last Used Bin.

As we all know, once a sales order, purchase order & transfer order gets "Released" as status, system will update "Warehouse Register" table. BUT, my issue is when I am trying to click "Create Warehouse Shipment" in sales order, system has given me a message as follows "No Warehouse Request was found. The warehouse shipment could not be created".And, when I verify the Warehouse Register table, the SO reference is not created.

I have not done any customization in this area. Purchase Order process is working fine but the issue is for any outbound transactions like Sales Order.

Your prompt responses will be highly appreciated.

*This post is locked for comments

I have the same question (0)

All responses (13)

Answers (0)

Mohana Yadav 60,967 Super User 2025 Season 2 on at

Like (0)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

Is it a normal sales order or drop shipment etc?

Was this reply helpful? Yes No
algeloca 160 on at

Like (0)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

Normal sales order.

Was this reply helpful? Yes No
algeloca 160 on at

Like (0)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

Correction- It's Warehouse Request table instead of Warehouse Register.

Was this reply helpful? Yes No
Suresh Kulla 50,233 Super User 2025 Season 2 on at

Like (0)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

Is sales order released ?

Was this reply helpful? Yes No
algeloca 160 on at

Like (0)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

yes

Was this reply helpful? Yes No
Suresh Kulla 50,233 Super User 2025 Season 2 on at

Like (0)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

Check if anyone of the sales line has Drop Shipment set to true.

Was this reply helpful? Yes No
keoma 32,729 on at

Like (1)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

check if the used item in the sales line has an inventory value > 0. if not this could be the reason. check also if the bin code in the sales line has a value.

Was this reply helpful? Yes No
Community Member on at

Like (0)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

Hi,

it seems like SO not "released".

Sales Order or Transfer Order ::"released"? - this action creates request.

Request stays in table if You reopen document!

Was this reply helpful? Yes No
Suggested answer

keoma 32,729 on at

Like (0)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

i tried it with cronus db using locations red (no warehouse require fields set, e.g. require shipment, ...) and yellow (all these options are set). i checked the code: when releasing the document of type oubound like a sales order a whse. request is created, if the options "require shipment" and "require pick" on the selected location are set to true, otherwise not: check trigger OnRun in cu 414 and fcts. Release and CreateWhseRqst in cu 5771.

i tested it successfully using item 1920-S and location red. i got exactly the same error message than you. using the same item with location yellow there was no error message, but instead the warehouse shipment was successfully created.

also check the inventory value of the used item(s) in the sales lines of your order acc. to the selected location/bin.

Was this reply helpful? Yes No
Suggested answer

Rishi Chourey 143 on at

Like (0)

Report

RE: NO WAREHOUSE REQUEST WAS FOUND (WMS NAV 2015)

Hi Angelito,

I also faced the same error. The Solution of it is mention below.

Sol :- If you have created the Sales Order and you already did the Whse. Shipment and you are trying this once again then you'll receive this error.

Or second reason might be You haven't created the Purchasase Order and Whse. Receipt, so it will give you error and please also check your location card if Bin

Mandatory is true then you should create a proper Receive process then you can create Whse. Shipment.

Was this reply helpful? Yes No