Dynamics Community Forum Thread Details

All license plates from one batch number allocated in one floor ax 2012 R3

Hi,

Is it possible to setup location directives in AX2012 in such way, that all License plates with same batch number to be allocated in same floor in my high-bay warehouse? Here is my case:

On inbound ramp I have 10 License plates with Product = 0001 and Batch number = 1000-100. These 10 LP should be stored in 10 locations in my BULK zone on same floor in one shelf. On my first shelf in BULK zone, I have:

1 floor -> 3 empty locations

2 floor -> 9 empty locations

3 floor -> 10 empty locations

4 floor -> 100 empty locations

I need to setup location directives (Work order type = Internal movement) in such way, that when AX starts looking for a Location for my FIRST License plate (of these 10LP) to check first all the floors for empty locations for the whole batch (1000-100). So then will skip 1 floor (only 3 empty), skip 2 floor (9 empty) and should suggest the first empty location from 3 floor (because of 10 available and will fit the 9 rest LP with batch number = 1000-100).

If AX does not find 10 empty locations on a same floor for first shelf, then should continue to the next shelf.

Any suggestions would be a great help?

Thanks

Quick Links