490
can any one tell me the main difference between line discount, multi line discount and total discount through an example.
and how can i create discount slab for a item according to the quantity
for example i want to make a discount slap of xyz item on which i want to keep discount 10% at 1 to 1000 quantity. 12% for 1001 to 10000 quantity. and 14 % to more than 10000 quantity.
regards shoaib
*This post is locked for comments
Hi Guy,
I would like to applied a tiered promo.
From $1.200 to $2,999 the customer will get a 5% discount.
From $3.000 the customer will get a 10% discount.
It could be ok to setup a total discount but the promo require to assign those promo only to certain items of the assortment.
Do you have an idea on how to setup it?
Best regards,
Pierre.
Hi SHOXF,
what is your intention?
Following example: We have a item ABC (the sales price (per piece) is 10 USD)
1 to 1,000 10% (Range A)
1,001 to 10,000 12% (Range B)
10,001 to (unlimited) 14% (Range C)
What should be the price if someone orders 15,000 pieces?
Version A
=========
- 15,000 is Range C
Apply this 14% to all pieces: (15,000*10 USD) - 14% = 150,000 - 21,000 = 129,000 (Line Amount)
This means a "calculated" price per piece of 129,000 / 15,000 = 8.60 USD (10 USD - 14%)
or did you even mean the following
Version B
=========
For the first 1,000 pieces use Range A, for the next 9,000 Range B and for the remaining 5,000 Range C
First 1,000 pieces ( 1- 1,000) 10% (1,000*10) - 10% = 10,000 - 1,000 = 9,000
Next 9,000 pieces ( 1,001-10,000) 12% (9,000*10) - 12% = 90,000 - 10,800 = 79,200
Next 5,000 pieces (10,001-15,000) 14% (5,000*10) - 14% = 50,000 - 7,000 = 43,000
LineAmount for all pieces in that case would be 131,200 (means a "calculated" price per peace of 131,200 / 15,000 = 8.746 USD
Can you please clarify your intention: Version A or Version B
regards
Douglas
No you do not have to have a trade agreement to manage the cost, it can come from the item record. If your TA is not called it is because the dimensions on your order line so not match the dimensions on the TA (or UOM etc.)
You sales pricing overlaps 1 to 10 and 1 to 100 it is trying to call 2 prices for the 1 to 10 range.
In your screenshot, AX says price search is active on the Color dimension only. It also says to check the Site and Warehouse dimensions. I think what it means is 'Don't set Site and Warehouse on your Trade agreement line'.
Can you create new trade agreement lines with only the Color dimension specified, post them and try again?
Share
Report
All responses (
Answers (
