Try Microsoft Edge
A fast and secure browser that's designed for Windows 10
The issue that we were initially encountering was that we were experiencing large variances in our production costing. Upon further investigation, what we found was that the variances were coming from a subassembly that had been created and was being utilized in the finished good. Reviewing the details on that subassembly and comparing to our realized costs, we found the variance to be related to the labor for the setup time on the operations for that subassembly. On this particular subassembly 20 hours of setup time for a process quantity of 100.00 had been assigned for several operations. Production orders were then created for a quantity of 1.00 of the finished good. The production order estimation included all 20 hours of setup time for each operation. Since the production order was only being created for 1/100th of the process quantity, the expectation was that the setup time should decrease accordingly.
In this example, the determination is that everything is working correctly. The reason for the variance is that setup time does not does not dynamically adjust for differences between the production order quantity and the process quantity since it is assumed that the time to set up the operation is the same regardless of the quantity. The variance received would be expected in the given scenario since the production order was created for a quantity different than the process quantity specified on the operation, but the setup time required and realized was just a fraction of the value estimated for the setup time since the estimated value was for the full process quantity.
Alternate setup options: