Microsoft Dynamics GP Year-End 2024: Payroll W-2 and W-3 information

🎉 Guess what time it is? Yep, it's that magical time of the year again – the end of 2024! Time to get those employee Form W2 and employer Form W3 ready to roll. But don't worry, we've got your back! This blog is your ultimate guide to creating those forms, and if you have any questions, we've probably already answered them here.

And here's the best part: for 2024, there are no changes to the W2, W3 forms or electronic filing. That's right, no new hoops to jump through! So, let's get this done and then kick back and enjoy a well-deserved vacation! 🌴✨

Why is this important? Because getting these forms right means smooth sailing for everyone – no tax headaches, no stress, just pure end-of-year bliss. Let's make it happen! 

RECOMMENDATION: Create the Year-End Closing and Year-End Wage file a couple of times in the current year (2024): This can be done in a test company refreshed with live company data Set up a test company in Microsoft Dynamics GP. If you do this in the live company, be sure to always make current restorable backups.

1. Prior to running the last payroll of the year. This allows you to validate and correct records if needed with the 2024 tax tables still installed.
2. After processing the last payroll of the year and before installing the next year’s tax tables (2025). This allows you to validate and correct records with the current year’s tax tables still in place.
   
   

Here is why: If you validate the current year’s employee’s W2 and know they are accurate BEFORE next year tax tables are installed and the first payroll of the next year is run, this will save you from doing a lot of unwanted steps.

If you must correct W2 data after installing the new year’s tax tables 2025, you will need to re-install the 2024 tax tables, make corrections, print the W2, then re-install the 2025 tax tables again. A lot of steps can be avoided if you are able to validate the 2024 W2 data prior to installing the 2025 tax tables or wait to install the 2025 tax tables till you are done with W2 processing.

Where does the information in the W-2's come from? 

Year-End Closing: HR & Payroll >> Routines >> Payroll >> Year-End Closing

When a year is closed in the payroll module, Microsoft Dynamics GP populates the Payroll Year End Wage tables, which are used to generate the Year-End Wage file to generate your W-2’s and W-3.

Year End Wage Report: HR & Payroll >> Routines >> Payroll >> Year-End Wage Report.

Use the Year-End Wage Report to verify W-2 amounts before printing W-2 statements. This report can be created as many times as you wish.

If an employee’s record needs corrections/changes/edits to ensure their W-2 is accurate after the Year-End Wage File has been created there are 2 options for you to use.

NOTE: Always make a backup of the databases prior to making any changes.

Option 1 - Manually Edit W-2's (most common):

Manually edit the W-2 via the Edit W-2 Information window (Microsoft Dynamics GP >> Tools >> Routines >> Payroll >> Edit W-2).

Note: Changes made here will update the Payroll Year End Wage tables only. These changes are not reflected in any other tables in the payroll module. 

If you remove the Year End Wage File for any year, ALL edits made manually via the Edit W-2 Information window are lost. This is because removing the year-end wage file removes data from all the Payroll Year End Wage tables for the year in question.

Option 2 - Remove Year-End Wage File, make changes, and recreate Year-End Wage File: NOTE: This can be done as many times as you want, just remember, if you choose this option for any manual edits, you've already in the Edit W2 Information window W-2's will be lost.

1. Ensure no users are processing in Payroll system wide.
2. If needed re-install 2024 tax tables
3. Remove the Year-End Wage file for the appropriate year Microsoft Dynamics GP >> Tools >> Utilities >> Payroll >> Remove Year End Information >> select the year you want to remove.
4. Make needed changes in Payroll (whether that's voiding checks, processing checks, fixing W-2 labels, processing manual checks, etc.)
5. Once you have verified all data is accurate, close the Payroll year again HR & Payroll >> Routines >> Payroll >> Year-End Closing
6. Verify changes updated the Year-End Wage file and W-2's is as expected.
7. Make another backup.
8. If needed, re-install 2025 tax tables prior to any further processing in Payroll for the 2024 payroll year (Microsoft Dynamics GP >> Maintenance >> US Payroll Updates >> Check for Tax Updates).
   
   

W-2 Frequently Asked Questions:

QUESTION 1: What will happen if I have deductions and/or benefits set to print in the same box on the W-2 statement with the same label?

ANSWER 1: The amounts will be combined and printed as one total.

QUESTION 2: Deductions, benefits, and/or pay codes are doubled/tripled on my W-2’s why, and how can I fix this?

• This may also manifest with the following errors when you create the year end age file:
• Payroll Year End - UPR_Year_End_WORK_Other failed. A record was already locked OR 
• Payroll Year End - UPR_Year_End_WORK_Special failed. A record was already locked

ANSWER 2: This happens when the same W-2 label has been assigned to a particular pay code, benefit, or deduction more than once (you can assign up to 4 W-2 labels to each code). Use this blog to resolve this issue Benefit, Deduction, and/or Pay codes amounts are doubled on the W-2 form the record lock error seems to cause issues when we have many deductions and benefits assigned to employees with codes they are not using (zero amount for the year).  You will be able to tell by the error message which employee is stopping the process and review their labels, especially look at duplicate labels for benefits and deductions and if they are needed, if not, remove.

Example script check for box 14 and 12 labels

QUESTION 3: Box 1 on the W-2 does not match Federal Wages in the Employee Summary window. Why, and how do I fix this?

ANSWER 3: It can be normal for Box 1 to differ from the Federal Wages in the Employee Summary window. All pay codes are added to ‘Gross’ under Cards >> Payroll >> Summary, even if the federal box is not marked on the pay code. However, most users do want these two values to match.

The calculation for Box 1 of the W-2 is as follows:

Gross Wages (from Employee Summary window) + YTD Benefits subject to Fed tax + Reported Tips + Charged Tips – YTD TSA Deductions this link explains this in more detail W-2 Wage and Tax Statement data source.

The only time a pay code is not added to ‘Gross’ is when the pay code is a ‘Business Expense’ pay type marked ‘not to be included as wages’, or when the pay code is a 'Pension' pay type.

It is very common for users to think pay codes not marked as subject to federal tax will not be included in Box 1. However, that is not the case.

If you do not want a pay code amount to be included in box 1 you should set it up as a business expense pay code pay type.

Most commonly, users will see amounts in this field updated with unexpected amounts when:

• A pay code was not marked to be subject to federal wages, so you aren’t expecting the value to be included in Box 1.
• A deduction, a benefit, or a pay code may have been changed so that it is taxed instead of not being taxed, or vice versa. This change causes a difference in federal wages in Form 941/W-2’s and the Payroll Summary report. This change is not corrected during the reconcile process.
• A manual check was processed incorrectly (taxable wages and tax amounts not recorded).

Read this link for more information on what can cause unexpected federal wages differences, along with how to fix the problem. Correct differences between federal wages on Form 941 and the Payroll Summary Report.

QUESTION 4: Where should I report the cost of coverage of an employer-sponsored group health plan on the W-2?

ANSWER 4: Applicable employer-sponsored group health plan values should be reported in Box 12 DD on the W-2. For more details see: Form W-2 Reporting of Employer-Sponsored Health Coverage

To add a W-2 box and label to a specific Employee:

1. Go to Cards >> Payroll >> Deduction or Benefit
2. Pull up the appropriate Employee ID, and the appropriate Code.
3. Next to W-2 Box: Use arrows to navigate to desired W-2 box space and enter the appropriate W-2 box.
4. Next to W-2 Label: Enter appropriate W-2 label.

NOTE: There are 4 possible labels available for every deduction and benefit, so verify the label is assigned only once to avoid duplication of values – See FAQ 2. It would be recommended to keep the codes consistent at the setup level, versus changing them at the employee level, just roll it down from setup.

QUESTION 5: What is the source of the Employer Identification Number (EIN) that appears as a default in the Print W-2 Forms window?

ANSWER 5: The EIN number is the federal or state ID entered in the Unemployment Tax Setup window (Microsoft Dynamics GP menu >> Setup >> Payroll >>Unemployment Tax) in the Unemployment Tax ID field.

QUESTION 6: In both the Edit W-2 Information window and the Print W-2 Forms window, there is a list used to select the year.

Is there a limit to the number of years available?

Is each year added to the year-end wage file, or does each year have separate year-end wage files created during the year-end closing process?

ANSWER 6: No, there is no limit to the number of years available. During the Payroll year-end closing process, the ‘year-end wage file’ is created for that specific year selected in the window.

Multiple years of history can be saved. However, if you choose the same year twice when performing the process, the previous file will be replaced by the new file.

If the correct year is entered each time, the new year’s information will be added to the file. This information can be cleared using the Remove Payroll Year-end Information window (HR & Payroll >> Utilities >> Payroll >> Remove Year-End Information).

QUESTION 7: If I add information in the Edit W-2 Special Information window (HR & Payroll >> Routines >> Payroll >> Edit W-2s >> Special button) without entering information in the Edit W-2 Information window, where will that information appear?

ANSWER 7: Microsoft Dynamics GP will print this special information on the additional W-2 (Each W-2 statement has space to print information about three labels and amounts for Special information. If an employee has more than three labels and amounts for Special information, additional W-2 statements will be printed for the employee.)

QUESTION 8: How do I print W-2 statements for Medicare Qualified Government employees (MQGE)?

ANSWER 8: The W-2 statements for Medicare Qualified Government Employees are printed separately from standard W-2 statements. To print W-2’s for MQGE employees, simply select the Medicare Qualified Government Employee option in the Employee Type box in the Print W-2 Forms window (Microsoft Dynamics GP menu >> Tools >> Routines >> Payroll >> Print W-2s).

QUESTION 9: I need to file W-2 Corrections using Form W-2C with the IRS. Can I print the W-2C in Microsoft Dynamics GP?

ANSWER 9: Microsoft Dynamics GP does print the Form W-2C. To help you with W2C filings, we recommend using Yearli - Form W2-C.
Microsoft Dynamics GP also does not support the W-2G (Gambling).

QUESTION 10: Can a W-2 be reprinted at the end of the year for an employee that had a W-2 print during the middle of the year, who is now inactive?

ANSWER 10: Yes, W-2’s printed for inactive employees during the year will be reprinted when W-2s are printed at year end.

QUESTION 11: Must the employee record be inactive before a special W-2 can be printed before the year end?

ANSWER 11: Yes

QUESTION 12: If I have employees that receive two W-2s because they have additional state, local tax, deductions or benefit information, will any other information be printed on the second W-2?

ANSWER 12: No, the only information that will be printed on the second W-2 is the employee address information, employer address information, and the additional information.

QUESTION 13: If your employer state ID number and employer unemployment ID numbers differ, do you need make changes to any information to print the employer state ID on the W-2s?

ANSWER 13: Dynamics GP allows you to maintain state ID numbers separate from unemployment ID numbers. So, you won’t need to manually change the number back to your Unemployment ID number after creating the Year-End Wage file or enter the Employer State ID number for each applicable employee’s W-2 information. You can verify the Employer State ID number is correct by referring to the Payroll Tax Identification Setup window (Microsoft Dynamics GP >> Tools >> Setup >> Payroll >> Tax ID).

QUESTION 14: Is Microsoft Dynamics GP going to make changes to accommodate locality + municipal code around local tax labels (ex: Ohio, Pennsylvania, etc.) on the W-2?

ANSWER 14: No changes have been made in Microsoft Dynamics GP. A user can modify the Locality field in the Edit W-2 Local Tax Information window (Microsoft Dynamics GP >> Tools >> Routines >> Payroll >> Edit W-2s >> Local button). However, the Locality field is limited to 6 characters. If you require more than 6 characters to accurately reflect your Locality + Municipality Greenshades does offer additional functionality around this.

QUESTION 15: I need to reprint a W-2 from a prior year. Can I do that in Microsoft Dynamics GP?

ANSWER 15: Yes, you can if you have the Year-End Wage file (Year-End Wage tables) still exists for that year. Simply choose the appropriate year from the Year drop down field in the Print W-2 Forms window.  The new 1 wide W-2 with boxes and lines is a nice option for this feature as the prior year will print automatically on the form, no need to search for old W-2 forms.

QUESTION 16: What determines how many W2’s to print for an employee?

ANSWER 16: Once you create the payroll year end wage file and then print your W2’s to screen. If you execute the below select statement for the employee look at this column “w2bfsttl” it will be assigned an A, B, C, etc. to determine how many W2’s to print.  A=2, B=3 W-2 forms and so on. Select w2bfsttl, * from UPR10101 where EMPLOYID='XXXXX' AND RPTNGYR='202X'--Replace X's employee id and the correct reporting year.

QUESTION 17: For a few of my W2’s, I’m getting an extra W2 for no reason and it is blank, why?

ANSWER 17: This usually happens because of local taxes. If you execute the below select statement for this employee that is printing a blank W2, verify they have a sequence number of 1, 2 or 3, if they are missing a 1, that could be the problem. Sequence number 1 pulls the local tax from Cards >> Payroll >> Tax the field Local Tax Code. If you have a local tax code listed that is inactive for this employee and has no YTD wages, we can see this causing an issue on the W2. This should be blank (if you are automatically calculating local taxes) or set it to an active local tax for the employee that has YTD data.

Select SEQNUMBR, * from UPR10106 where EMPLOYID='XXXXX' AND RPTNGYR='202X' -- Replace X's employee id and the correct reporting year

QUESTION 18: Should Box 12DD print on the W-3 it seems to be missing?

ANSWER 18: Not every box and label that prints on the W-2 is summed on the W-3.  Review this link to the IRS General instructions for forms W-2 and W-3 

for details but examples that do not print on the W-3 are codes A-C, J-R, T-W, Z, DD, FF, GG, and HH are not reported on the form W-3.

QUESTION 19: How does the Retirement Plan checkbox get marked on the W-2, when I do not have it marked under Cards >> Payroll >> Tax?

ANSWER 19: Per the W-2 instructions this box should be marked if the employee was an "active participant" for any part of the year. Example 401K, 403B, SEP, 457B, 501C, etc. 

For example, if you have a $100.00 on the employee W2 in Box 12D, the retirement plan box will be marked when you create the year end wage file, even if it is not marked under Cards >> Payroll >> Tax.
Also, on the validation report it will warn you when you have labels for retirement plans and the box is not marked. Special Codes are deferred comp, but W-2 Retirement Plan is not checked.

W-2 and W-3 Resources:

U.S. Year-end Update - Microsoft Dynamics GP

W-2 Wage and Tax Statement data source

General Instructions for Forms W-2 and W-3

2024 Form W-2

2024 Form W-3

Microsoft Business Checks - Hard copy W-2 Forms 800-432-1281

Specifications for filing forms W-2 and EFW2

Accuwage

Payroll Documentation

Remember, you have the ability print W-2's with lines on blank paper. The Form Type 1-Wide Forms with Box to accomplish this go to Microsoft Dynamics GP >> Routines >> Payroll >> Print W-2's >> Form Type = 1 Wide- Forms with Box >> Print = W-2 Forms): 

Note: GP only prints the black form with lines, not the red form. Most customers electronically file so the red forms do not need to be purchased, just file electronic for FREE.

If you need to purchase hard copies of Form W2, we recommend checking out Microsoft Business Checks. These are the forms we GP uses; therefore, the data and boxes should align.

I hope this is helpful and that you have a successful Year-End!  If you have any feedback or suggestions, please let us know. Have a wonderful Year-End!

Be sure to refer to the 2024 Year-End Blog Schedule to review current and upcoming blog posts and other helpful resource links related to Year-End Closing for Dynamics GP.

Terry Heley

Microsoft