AXUpdateInstaller.exe list not giving any output

(1) Share

Report

Posted on by MYGz

1,827

Hi,

I have setup 10.0.39 and restored a blank DB.

I extracted Service Update 10.0.41 To C:\SU41

But when I run .\AXUpdateInstaller.exe list I don't get the output.

PS C:\SU41> .\AXUpdateInstaller.exe list
List of Runbook ID on the system:

SU41

List of services installed on the system:

So I ignored it and tried to execute the runbook after filling up the DefaultTopology file with all the services.

But I'm getting below error:

PS C:\SU41> .\AXUpdateInstaller.exe execute -runbookid="SU41"
Start executing runbook : SU41
Executing step: 1
BackupConnectionString script for service model: AOSService on machine: localhost
Manual AOS connection string backup step.
The step: 1 is in failed state, you can use rerunstep command to debug the step explicitly

PS C:\SU41>

Any tips?

Categories:

Administration and Setup

All responses (2)

Answers (0)

Suggested answer

Florian Hopfner 2,440 on at

Like (0)

Report

AXUpdateInstaller.exe list not giving any output

Either use a topology file from a previous update. Or use Invoke-D365SDPInstall from d365fo.tools (version 0.7.15 or higher) with -Command RunAll, which will handle all the AXUpdateInstaller.exe commands for you and generate a topology file with a list of known services if AXUpdateInstaller.exe list provides no output.
Sigma992 2 on at

Like (0)

Report

AXUpdateInstaller.exe list not giving any output

Hi,

Same issue on a Onebox while trying to update v39 to 41.

List is empty and I can't import the runbook I generated.

I was able to update another environement which is a cloud-hosted.

No solution found yet for the OneBox.

Will update if found.