Barcode with Carriage Return not working

(0) Share

Report

Posted on by Kenny Channels

Have an HP rp5700 with an HP USB Barcode Scanner. Using Microsoft POS 2.0. If the scanner is set to defaults while in POS and you scan an item it types the number but I of course need it to hit enter after each scan. If I use the HP provided programming sheet to configure the scanner to append the carriage return to the scan then when I scan in POS nothing at all happens. If I open up notepad it works perfectly, I scan a barcode, it types it out and drops to the next line. Anybody seen this before? I'm at a loss here...

All responses (3)

Answers (0)

kylerramos558 10 on at

Like (0)

Report

RE: Barcode with Carriage Return not working

Information on various Korean casino 우리카지노 sites and baccarat sites
Kenny Channels 25 on at

Like (0)

Report

Re: Re: Barcode with Carriage Return not working

It's the EY022AT. I'll give it a try and let you know. My customer is about 3 hours from me so I'll have to walk them through it over the phone and hopefully have them not do something we can't get undone, :)
Community Member on at

Like (0)

Report

Re: Barcode with Carriage Return not working

Which model is teh HP USB Scanner. Sometimes you have to enable a double return and sometimes you need a LF+CR. it justs depends.

Ed Boyer